Several storage companies are testing devices that could double the throughput of Fibre Channel storage-area networks and network-attached storage boxes.
By submitting your email address, you agree to receive emails regarding relevant topic offers from TechTarget and its partners. You can withdraw your consent at any time. Contact TechTarget at 275 Grove Street, Newton, MA.
The faster 4Gbit/sec. standard was approved last June by the Fibre Channel Industry Association, but suppliers hesitated to begin developing the faster technology because of a slump in storage purchases.
Now, makers of Fibre Channel host bus adapters, switches and disc drives say devices adhering to the new standard are on the horizon and will cost roughly the same or a little more than 2Gbit/sec. hardware.
Some suppliers are even releasing products with 10Gbit/sec. capabilities well ahead of a planned standardisation in 2006. But analysts and companies warned the 10Gbit/sec. devices will nor be backward-compatible with 1Gbit/sec. or 2Gbit/sec. products and will cost about five times as much per port as existing 2Gbit/sec. and upcoming 4Gbit/sec. devices, or $5,000 a port.
"We're not sure we'll do 4Gbit because really, 10Gbit is so close behind," said Tim Weir, Storage Technology's senior product marketing manager for the Automated Tape Solutions division. "We've got 2Gbit, and we're watching the market. Whatever the market requires, we'll be there. But at this point, it's unclear whether it will be 4 or 10.
Steve Kenniston, an analyst at the Enterprise Storage Group, said the move from 2Gbit/sec. to 4Gbit/sec. Fibre Channel can be compared with the jump from Intel's Pentium 3 processors to Pentium 4. The move to 10Gbit/sec. Fibre Channel standard would be a "quantum leap", akin to moving to Intel's Xeon processor.
Hitachi Global Storage Technologies, the disc manufacturing arm of HDS, has said it will begin joint testing of 4Gbit/sec. hard drives with resellers and expects those devices to be available by the summer.
Tony DiCenzo, a member of the Storage Networking Industry Association's board of directors, said low cost and backward compatibility with 2Gbit/sec. and 1Gbit/sec. Fibre Channel will drive sales of hardware suppoerting the new, faster standard.
DiCenzo, who is also director of marketing at Brocade Communications Systems, said that while users are unlikely to rush to replace 2Gbit/sec. devices in Sans, the added throughput will be attractive to those expanding an existing infrastructure or grouping switch ports together. "If you can get 4Gbit for the price of 2Gbit, you do it," he added.
Brocade will begin testing 4Gbit/sec. and 10Gbit/sec. switches with makers of storage devices in 2005.
Even at $5,000 a port - compared with $1,000 a port for 4Gbit/sec. Fibre Channel switches - 10Gbit/sec. Fibre Channel could have a place in a San. For example, QLogic's switch has two 10Gbit ports for interconnections between switches, reducing the number of ports needed for switch clustering. The company expects to ship 4Gbit/sec. host bus adapters, plus switches supporting that rate as well as 10Gbit/sec by the middle of the year.
A spokesman for Cisco Systems said the company has no "immediate plans to support 4Gbit Fibre Channel in our San switch portfolio", but added that it would be able to provide support for 4Gbit/sec. Fibre Channel "if strong market demand requires us to do so".
Lucas Mearian writes for Computerworld