Results for the tag, per rack.

Find the latest news and information on per rack from ComputerWeekly.com and the web.

All ResultsResults from Computer Weekly - PER RACK

...datacentre space requirements would be in the region of 1,600 sqm with an increasing average power capacity requirement per rack of 5.7 kW. Putting their money where their mouth is, e-shelter announced a new generation data centre campus... http://www.computerweekly.com/Articles/2009/07/24/237043/give-me-e-shelter-for-datacentres.htm
...Parchment has his doubts whether even water will be sufficient to cool HPC equipment as it reaches 70KW or even 100KW per rack. "Water might turn out to be a short term solution," he says. The system should be fully commissioned by mid... http://www.computerweekly.com/Articles/2009/08/20/237381/computing-demand-pressures-the-datacentre-at-southampton.htm
...technology allows Tesco to run more blade servers per rack than is normally possible. "We can use 30kW per rack, compared with 2-3kW per rack with traditional datacentre cooling," he says... http://www.computerweekly.com/235256.htm
...switches by 97%, and rack space by 75%. The fully configured product is able to support 48 physical blades per rack - supporting 96 nodes of two-socket, quad-core processors per node, resulting in a total of 768 processor cores... http://www.computerweekly.com/Articles/2009/04/15/235635/sun-introduces-supercomputing-blade-system.htm
...services department to allow us to grow in terms of the density of the equipment. “Our day-one configuration is 3kW per rack, day two takes us up to 5kW, and with little modifications to the room, we can accommodate higher densities through blade... http://www.computerweekly.com/Articles/2006/10/03/218750/how-to-avoid-datacentre-downtime.htm
...bay DMX we have installed requires six power feeds, two per rack, compared to only two on our 8830 [and needs] two additional...in the previous version. Each rack can now hold 96 TB per rack, as opposed to 64 TB in the previous model. Thus it will... http://www.computerweekly.com/Articles/2007/07/18/225618/storage-disc-arrays-updated-by-emc.htm
... Cooling units fitted to either side of the rack provide further cooling. APC says Infrastruxure can cool up to 60kW per rack. APC uses software to produce simulations of airflow within the datacentre. This allows different designs to be evaluated... http://www.computerweekly.com/Articles/2006/02/28/214432/heat-problem-is-undermining-datacentre-advances-says.htm
...Blade servers can consume up to 30 kW per rack, which either cannot be cooled...increasing the total performance capability per rack in the data center. The new IBM BladeCenter...system can save up to $10,148 per rack per year. In addition, the iDataPlex... http://www.computerweekly.com/DowntimePDF/pdf/Increasing_energ_effiiency_with_x86servers.pdf
...of datacentres will exceed 6 kW per rack within two years; Bell expects that...1. In addition, electrical costs per rack will increase by a factor of four...datacentres has jumped from 4 kW to 6 kW per rack. "Beyond 6 kW, you can't cool... http://www.computerweekly.com/Articles/2007/03/28/222467/Solving-storage-power-and-cooling-concerns.htm
...Intel cluster technology on its eServer BladeCenter blade servers. BladeCenter, which can hold as many as 84 blades per rack, presents a "dimension of density into the cluster space" that has not been available before, according to David Turek... http://www.computerweekly.com/Articles/2003/05/21/194704/ibm-brings-clustering-to-bladecenter.htm

All ResultsNews and blogs from the web - PER RACK

All ResultsOther content from the web - PER RACK

ADVERTISEMENT
ADVERTISEMENT
QHS5-20091008.5